Safety, our primary concern.
Current leakage protection
The medical grade mechanism can be activated in 0.1 second in order to prevent toddlers from an electric shock accident.
Overload current protection
Once the event of overload current is detected, the power strip will be shut down immediately to avoid further danger.
We even record environmental temperature to keep you from potentially dangerous case caused by fire.
Made up of the anti-combustion material, the casing firmly encircles the delicate inner construction to prevent accidents.
Prevented from overheating
With our patent low resistance structures, we have efficiently solved the common problem of the overheating power strip.
Prevention of information leakage
Information leakage is until now the main problem of IoT. We take the issue seriously and adopt the multi-level encryption protection for those with the same concerns.
with Global Patents
De-bounce Switcheffectively reduces the power supply noises produced by the relay. The patented circuit design provides you a thorough insurance against unnecessary switching and therefore extends the life cycle of your appliances.
Zero Crossing SwitchOur patent technique makes the switch possible to be turned on/off always at the zero crossing point. It is crucial to your audio equipment in avoiding switching surge and protecting your appliances.
Durable Relay SwitchBoth the relay switches above has been switched over 10000 times. As it clearly shows, the cheap one (left) is covered with charcoal surface due to sparks, which potentially causes short circuit and even fire. Ours (right) reduces the sparks and therefore remains new and safe.
Heavy Duty DesignThe combination of superior materials: the flame-proof case (UL 94 V-0, 5VB; the thickness more than 0.11 inches), the tough front panel (Pencil Hardness ASTM D3363 - B-HB) and the robust power cord (SJT 105°C 3x14AWG (2.08MM2) 300V VW-1).
Extremely High ConductivityMade up of high-conductive and low-impedant copper with the cross-sectional area approx. 6.0 mm2 (7.5mm ht. x 0.8mm thk.), it creates an exceptional pathway for power to travel from the wall, bringing out excellent performance previously bottlenecked by a cheap one.
The low-impedant copper (0.8 mm thick, 20 times than the normal one) serves as the bset pathway for power.
Most proucts use mere thin copper clad on PCB as conductor (0.035 mm thick at most), which is bad at heat dissipation and prone to danger when using high-power appliances.
We look into every detailThe best quality achieved by the inductrial-grade manufacturing.
We use UL certificated terminal plugs and 8 solid tenon clamps to enhance stability and safety.
A common power strip is made up of unstable solder conductor and weak connection of the cable and device, which is easy to break and caused danger.
Bring safety with you
Always online, always safeConnected to home Wi-Fi and you gain a 24 hours guard.
to Conserve Energy
Patent energy-conserving switchOur new designed mechanism is wisely switchable between the operating mode and the energy-conserving mode, with which the unnecessary standby consumption can be easily reduced.
Stand-by Consumption Comparison
Using smart power strip is not necessarily accompanied by the higher electric bill. Our patent design is able to reduce the consumption to 1/3 of other brands’ products, leading to the high efficiency and energy conservation.
|Total Number of Outlets||5|
|Number of Switchable Outlets||5|
|Number of Programmable Outlets||5|
|Continuous Electrical Rating||110V/15A/1650W|
|Wi-Fi RF Output Power (Average)||802.11b: 16.5 +- 1dBm
802.11g: 14 +- 1dBm
|Antenna type||Integrated PCB antenna|
|15A Over Current Protection Response Time, 5% Tolerance||600%, 1.05 sec max
>400%, 3.05 sec max
>120%, 10 sec max
|Over Temperature Alert||Ext. Temp >80℃ default|
|Surge Protection||UL1449/6KV, Surge Protective Devices|
|Cable Length||1.8M (5.9 Ft.)|
|Operational Voltage||AC 110V|
|Max Rating load current||15 Amp|
|Switch type||5 ports, 15A Smart anti-Arc Hybrid Switch|
|Switch times limit with full load||> 5,000,000 times|
|Switch inrush current rating||190A/110V, max with loading 6.3ohm +350uF|
|Operational temperature||0℃ ~ 40℃|
|Operational humidity||0% ~ 95%, Noncondensible|
|Power consumption||1.6W typ/3.5W Wi-Fi burst|
|Casing flameproof grade||UL 94 V-0, 5VB|
|Cable flameproof grade||VW-1|
|Power monitor (Watt)||Independent power meter of each port (1.0~1650W)|
|Power monitor interference||Power value interference 0.5% port to port|
|UL safety certification||UL-1363 Re-locatable Power Taps
UL-244A Solid-State Controls for Appliances
UL-498A Current Taps and Adapters
UL-1449 Surge Protective Devices
|Monitor OS||Cross platform|